Friday, August 26, 2016

Xhorse Mini VCI Cable for Toyota TIS Techstream: a MUST tool

Among so many positive reviews on Xhorse Mini VCI Cable for Toyota TIS Techstream, people said this diagnostic cable beyond your expectation is “definitely a must for Toyota owners!” Why? Check following reviews and you will know.

Xhorse Mini VCI Cable Tested OK to program key:
2014 Lexus RX-350 smart key
2005 Lexus RX330
2013 Lexus
2013 Toyota Camry
2011 Toyota Sienna XLE (Programmed a G key and a key fob)
2014 Toyota Sienna (Program key and key fob)
2009 Toyota Prius
2014 Toyota Prius
2014 Toyota Highlander (in about 5 minutes)
2012 Toyota Tundra (Programmed a G key)
etc
mini-vci-for-toyota-tis-techstream-single-cable-6
Mini VCI J2534 Cable is tested work OK:
Toyota: 2006 2007 Toyota Corolla, Toyota Tacoma, 2006 Toyota highlander hybrid, 2008 2014 Toyota Prius, 1998 Toyota Camry, 2012 Toyota FJ Cruiser SUV, 2001 Toyota Celica, 2000 Toyota MR2 Spyder, 1999 Toyota Solara, 2016 Toyota Tundra, etc.
Lexus: 2004 Lexus RX300, Lexus RX350, 2006 Lexus RX, Lexus LX470, Lexus LX570, etc.

Reviews on Mini VCI for Toyota TIS:

This works 100% on my 2012 FJ Cruiser! Now no more annoying seat belt warning buzzer! This cable as an alternative to the OEM $500 Mongoose cable!

The product is great. It allows you to change all those pesky dealer only options, also run real time diagnostics and see real time values for all sorts.

This cable may be cheap, or a knock off, but it works, and it works well! My 01 Celica connected right away, greeted with a prompt confirming it was a 2001 Toyota Celica GT with the 1ZZ-FE engine, same thing with my 00 MR2 Spyder. Tried it on my mom’s 06 Avalon, and I saw more options. Both the MR2 and the Avalon, as well as a 99 Solara my brother owns have immobilizers built in, so I can add keys, clear lost keys, etc.

It works exactly as stated to connect to a Toyota ECU to diagnose and program it. Also I used it to program a Toyota to recognize a newly added factory remote starter assembly.

I had issues pinpointing a check engine light I was receiving on my 2009 Toyota Prius. This product along with its software allowed me to quickly see what issue I was having as well as find that my 12V battery was on its way out. Sure saves money that would have been spent at the dealer.


My Lexus dealer wanted to charge me $300 to read the code for an intermittent SRS malfunction light that comes on now and then. One friend recommended this MINI VCI cable to me, I bought one to give it a go. I use this $26 cable easily read out the code!

The cable worked great on my 2016 Tundra. I was able to disable the seatbelt chime and activate the factory alarm. There are a number of other customization options available but I haven’t tried them yet. It also gives you access to all of the diagnostic data for the mechanical and electrical components. Overall well worth the money!

I would recommend Xhorse MINI VCI to anyone who owns a Toyota vehicle. I can change things on my Toyota 4runner very easily. I had some issues with VSC lights coming on. With this tool I was able to do Zero Point Calibration.

I was able to fix a VGRS steering issue on my 2003 Lexus LX 470. The software engaged something mechanical in my steering column which allowed me to realign my steering wheel to the desired position. I was amazed.

This cable and software works to communicate with the 2007-2012 series RAV4. Cable is well made. Software installation was not straight-forward. But at this price level it is a usable product.

Worked great 2015 Prius V. Used it to reset codes, troubleshoot problems, calibrate an ABS sensor, and also bleed the brakes.

For 2007 Toyota Prius which has with transmission issues it told me exactly what was wrong specifically. For 2000 Lexus GS400 which is said had a fault brake booster. To get these diagnoses at the dealer would have cost me nearly $100 and $200 respectively. But this cost me only $30!

I just successfully used MINI VCI cable to fix some annoyances on my 2012 RAV4. Specifically, I disabled the obnoxious multiple beeps you normally hear when locking/unlocking the car with the remote, as well as the daytime running lights and the seatbelt chime.

Thursday, August 18, 2016

Disable BMW E46 DRLs with NCS expert OBD2 Cable step by step

Since there is no detail instruction on disabling BMW Daytime Running lights, I decided to make my own document. I am driving a BMW E46 1998 year.
Software & Hardware:
1). Using NCS Expert in BMW ICOM Rheingold ISTA-D ISTA-P software program and connect BWM ICOM A2+B+C diagnostic system
2). Download free NCS expert software and get it work on INPA K+DCAN cable
3) Old E46 has 20-pin diagnostic connector, so I need extra 20-pin to 16-pin cable.
Disclaimer:
The procedure works perfect on my E46, not sure if it works on other BMW models.
Instructions:
Open My computer
Open NCS Expert folder
Open work folder
Open a notepad “FSW-PSA.MAN” in WORK folder
Save the file
Open NCS Expert
Select File>>Load file
Select Renitor’s NCS Expert Profile


Press F1 VIN/ZCS/FA button
Press F3 ZCS/FA t.ECU
Select BMW model: E46, press OK


Select E46 ECU type: EWS, press OK
Press F6 Back
The system will display all available ECU
Press F4 Process ECU
Choose ECU: LSZ, click OK


Check ECU info in “Enter SGET data” windows, click OK
Press F5 Basic functions
Pull down the function list and select “coapReadSgGetFswPsw”, press OK


Change CBD name to LSZ.C27, press OK
Basic function perfect ended
Copy and paste “PSW-PSW.TRC” on WORK folder to desktop
Open “PSW-PSW.TRC” notepad
Select Edit tab
Look for file with “drl” and locate “FERNLICHT-DRL nicht_aktiv ”


Delete “nicht-”


Change “EINZEIT-DRL wert-01” to “EINZEIT-DRL wert-02”


Pull download the list and locate “TAGFAHRLICHT nicht_aktiv”, delete “nicht”


Pull down the list, locate “PROGRAMMPARAMETER-LSZ-1-10 ece” to “PROGRAMMPARAMETER-LSZ-1-10 us”
  • “ece-xenon” remains unchanged.
  • LSZ-11 and later remains unchanged


Save and rename the file as “FSW-PSW.MAN”
Copy “FSW-PSW.MAN” on desktop to WORK folder and replace it
Press F3 “Execute job”
Check if your daytime running lights are disabled
Follow the system prompt and then exit the BMW NCS Expert software

Xhorse KM+IMMO OBD2 Cable Tool Skoda Superb 09 mileage correction

My Superb is running 250,000 Km, while it displayed at 200,000 KM only. I am Afanasy from Russian. Much reputation is given to the VAG KM+ IMMO odometer correction cable in many Russian vehicle forums. So I took their advice to rush myself to get one to play with.
My Vehicle Model: 2009 Skoda Superb
I purchased:
A piece of Super VAG KM+IMMO interface
A CD driver included in the package
Where& How& How much:
I got this from uobdii.com because it is the authorized dealer and provides original X-horse product. It took me US$487 shipping via DHL.
Comment/Experience:
Mine VAG KM+IMMO interface is the latest version V1.8.2. The newest version has avoided data loss problem during the update procedure. And the latest version adds NEC24c32& NEC24c64 algos, 95320 immo functions etc.
As soon as the package arrived at my door, I provided the sale girl the SN. They activated and updated the device and get NEC95320authorization.
I have a 1T0920881A dashboard which is configured with Nec24C32. Lucky that mine dash form is Nec24C32. If I have NEC24C64, I have to purchase NEC24C64 Update Module for VAG KM IMMO TOOL to work with VAG KM IMMO tool.
The VAG KM cable is not that difficult to play with. I had get myself a pdf manual to play with
VAG KM+IMMO Tool User Manual
http://www.uobdii.com/upload/service/vag-km-immo-tool-user-manual.pdf
My Superb is running 250,000 Km, while it displayed at 200,000 KM.
I hooked it up to change kilometer, read and change VIN number, it worked no problem.



These days I got another chance to realize other extra function. One of my clients has lost his car key so he went to my garage to match new keys. It is time to project key programming function. Followed by the using guide, I had solved the problem without much effort.
How to Add Dealer Key with Tango
http://www.uobdii.com/upload/service/vag-km-immo-tool-adding-dealer-key-with-tango.pdf
The user guide displays as clearly as possible on how to make cars keys either lost all original key or at least has one key.
Highly recommend this tool for my peers.

Monday, August 15, 2016

Diagnose Jaguar air suspension with JLR mangoose SDD OBD2 Cable

Here is an instruction on  how to diagnose Jaguar air suspension with JLR mangoose SDD  OBD2 diagnostic interface for Jaguar and Landrover.

Vehicle symptom:
2004 Jaguar XJ8 64,000 idling with yellow check engine light on

Instruction:

Well install JLR SDD V142 diagnostic software
Connect the mangoose /mangoose pro cable with vehicle via OBD socket
When loads SDD it automatically read the car VIN, and then welcome at the vehicle summary screen

Check the DTCs status. Come to the Symptom menu, jlr sdd will detect the vehicle control modules. The yellow question marks indicates that the vehicle does not have the option module fitted, like CCM, FLM etc


To erase suspension code, move to “Chassis”>> “Suspension system” >> “Vehicle dynamic suspension


The system will detect the DTCs automatically and analyze the DTCs and tells you the most likely candidate for the fault.  The DTCs result will group into events based on the symptoms you have specified.

A single fault code “Pressure increases too slow when fitting reservoir” (suspension code) is listed in Event 1. The bulb icon on the right indicates that the check engine light (amber suspension light) flashes. There are also two DTCs in Unknown Event, they are not the main causes.


Click the RLM C1A20-64 DTC information‘i’ icon, the SDD software system will bring me about the DTC Help.


Directly search “Possible causes” that matches with the vehicle symptom. Then do some modification to solve the existing problem. For example: if the compressor is faulty or the intake filter is blocked/ restricted, get the old compressor unit replaced.

Wednesday, August 10, 2016

VAG CAN PRO V5.5.1 CAN BUS UDS K-line Diagnostic Tool On Sale!

VAG CAN PRO is Diagnostic and programming tool for VW Audi Seat and Skoda models manufactured between 1990 and 2015. Support CAN BUS + UDS + K-Line. This new product has been released on uobdii. Here is the info of this affordable product.

VAG CAN PRO display:


Main Features of VAG CAN PRO
Unique Guided functions OCF (One-Click-Function)
First in the world 3rd party cheap flasher for VW
First in the world 3rd party cheap flasher supporting UDS
First in the world ESP MK60EC1 offline coding solution
First in the world 3rd party cheap Diagnose tool supporting fully MQB (Golf VII, Octavia III). Support since 01.2013
First in the world 3rd party cheap Diagnose tool supporting Parameter (ZDC) upload
First in the world VIM solution for Discover Pro and MMI-MQB
Coding controllers for PR-codes;
“Login finder” – allows you to scan and logins in the CAN controllers UDS;
Support for the new Polo in 2014 Facelift;
Support for the new Passat B8;
Full support of Audi TT-3 on the platform of the IBC;
Full support for Skoda Fabia III

VAG CAN PRO V5.51 Supported Cars:
1. Audi
A2 2009-
A3 8P 2003-
A3 – platform MQB-
A4 model 8E wariant B7 (Engine, transmission, airbags, ABS, park) 2005-
A4 model 8K wariant B8 (UDS + TP2.0) 2008-
A5 model 8K (UDS) 2007-
A6 model 4F 2004-
A8 model 4E 2003-
Q3 (UDS) 2010-
Q5 (UDS) 2008-
Q7 (TP2.0 + UDS) 2006-
S5 model 8K
(R)S6 model 4F
R8 (UDS)
TT model 8J 2007-

  1. Mercedes
    Sprinter (VW Crafter) – – Only the engine and immobilizer
  2. Seat
    Altea
    Leon MQB 2013-
    Leon model 1P 2005-
    Toledo model 5P 2004-
    Exeo 2008- (Engine, transmission, airbags, ABS, park)
  3. Skoda
    octavia model 1Z 2004 –
    octavia platform MQB –
    superb II B6 2008-
    fabia model 5J 2007-
    yeti 2009-
  4. Volkswagen
    Crafter (immobilizer, engine)
    Caddy model 2K 2005-
    Eos
    Golf V model 1K
    Golf VI model 5K
    Golf VII platform MQB
    Golf Plus
    Jetta II model 1K
    Transporter / Multivan (Only after the CAN-BUS drive for storing data)
    Multivan/Transporter GP model 7E (UDS) 2009-
    Passat B6 model 3C 2005-
    Passat CC-
    Phaeton GP 2007-
    Polo model 6R 2009-
    Polo FL MQB 2014-
    Scirocco III-
    Touran-
    Tiguan-
    Touareg GP 2007-
    Touareg NF 2010

Audi Comments:
1. Option A4 8E B6 model
This model has a can-bus (TP1.6), but it is not connected to the diagnostic socket. The car is fully diagnosed on the K-line (VCP required interface + K). Used protocols KWP2000 and KWP1281 it.
2 .Model A4 8E, B7 option
This model has a CAN BUS TP2.0, but the diagnostic socket is only connected to the so- called CAN-Antrieb, i.e. Engine, transmission, airbags, ABS, Quattro drive.
In addition, a standard K-line. In other words, VCP fully supports the diagnosis B7 models, but only in the CAN-Antrieb. Other controllers are available through the K-Line and KWP2000 KWP1281 protocols.

How to install Mongoose JLR143 OBD2 Cable for Jaguar and Land Rover

Hi, boys. Mongoose JLR143 will be released soon, you know. Here is the Mongoose JLR143 installation instruction.
This Mongoose JLR143 is compatible with the following device:
JLR Mangoose for Jaguar and Land Rover
JLR Mangoose Pro for Jaguar and Land Rover
JLR Mangoose 3 IN 1
Mongoose JLR143 installation guide:
Preparation
Part 1 Install SDD
Part 2 Install VDF_JA
Part 3 Install VDF_JV
Part 4 Install Additional Pinpoint Tests
Part 5 Install SDD 143.01.001
Part 6 Install VDF_LA
Part 7 Install VDF_LV
Part 8 Install J2534 MongoosePro JLR Setup
Part 9 Install software for MongoosePro JLR J2534 Interface
Part 10 Run JLR SDD
Part I1 Install Deep Freeze
Video guide:
https://www.dropbox.com/s/u92k6uhs42w4ffz/SP116%20SP205%20SP216%20Mongoose%20JLR143%20install%20video.avi?dl=0
Step-by-step instruction:
Preparation
Note: please disconnect the internet connection when installing and using JLR143.
Click the laptop icon on the Desktop menu bar to open network connection.
Disable all network connection Local Area Connection & Wireless Network Connection &….
Part 1 Install SDD
Open My Computer>>143-1(F:), to copy “Driver” “DF5td” “DFStd_KEY” to Desktop.
Open “SDD143.00_FULL”.
Select setup language to continue.
Click Yes to restart your computer.


Click Next.
Installing…
Click Next for installing SDD.
Select “I accept… agreement” and click Next.
Tick on “I have read and understand…” and click Next.
Destination: click Next.
Languages: click Next.
Click Install to begin installation.
Installing SDD…
Click Next to install M0XA UPort 1110/1130/1150 Windows Driver.
Destination location: click Next.
Start menu folder: click Next.
Click Install to begin installation.
Installing M0XA UPort 1110/1130/1150 Windows Driver.
Click Finish for installation of M0XA UPort 1110/1130/1150 Windows Driver.
Go on installing SDD…
Click Finish when successfully installing SDD and restart your computer.
Part 2 Install VDF_JA
Open My Computer>>143-1(F:)>>VDF_JA_143.
Choose setup language.
Installing…
Click Finish after successfully installing VDF_JA.
Part 3 Install VDF_JV
Close all the interface, and reopen My Computer>>143-2(F:)>>VDF_JV_143.
Choose setup language.
Installing…
Click Finish after successfully installing VDF_JV.
Part 4 Install Additional Pinpoint Tests
Open My Computer>>143-2(F:)>>SPA_143.
Prompt: Additional Pinpoint Tests will be installed as a background task. Click OK.
Installing Additional Pinpoint Tests…. (wait for about 1 hour)
Click Finish after installing Additional Pinpoint Tests.
Part 5 Install SDD 143.01.001
Close all the interface, and reopen My Computer>>143-3(F:)>>SDD 143.01.
Click Yes to restart your computer.
Installing SDD 143.01…
Click Finish after installing SDD 143.01.001, and restart your computer.
Part 6 Install VDF_LA
Close all the interface, and reopen My Computer>>143-3(F:)>>VDF_LA_143.
Choose setup language.
Installing…
Click Finish after installing VDF_LA.
Part 7 Install VDF_LV
Open My Computer>>143-3(F:)>>VDF_LV_143.
Choose setup language.
Installing…
Click Finish after installing VDF_LV.
Part 8 Install J2534 MongoosePro JLR Setup
Close all the interface, and open “Driver” on Desktop.
Right click drivers for MongoosePro JLR for Install.
Click Next.
Click “I accept…agreement” to go on.
Destination folder: click Next.
Click Install.
Installing J2534 MongoosePro JLR Setup…
Prompt: please attach your device to this computer any time after installation has finished. Click OK.
Click Finish.
Restart your computer.
Part 9 Install software for MongoosePro JLR J2534 Interface
Found New Hardware Wizard: click Next, with selection of “Install…(Recommend)”.
Installing…
Click Finish for installing software for MongoosePro JLR J2534 Interface.
Right click My Computer for Manage.
Select Device Manager>>Vehicle PassThur Interfaces>>MongoosePro JLR J2534 Interface.
Then close computer management.
Part 10 Run JLR SDD
Open JLR SDD on Desktop.
Close Setup Windows Internet Explorer 8 interface.
Close Windows Internet Explorer interface.
Loading…


Window Explorer- Search Provider Default: click OK.
Close Manage Add-ons interface.
Click the play button to enter SDD.
Click Continue.


Click Continue.


Finish dealer information to use SDD. Click Continue.
Click Continue. (here’s a J2534 icon)


Click Auto VIN Read.


Click Start new session.


Select High line instrument cluster, and click save.
Click Diagnosis.
Select Powertrain>>Engine system>>Engine cooling, and click Continue.


Select CAN_HS>>PCI>>Rerun data collect for this module.


Again click Diagnosis.
Click continue.
Click Recommendations and Service Functions on the top line, to read.


Close the interface after reading.
JLR Application Launcher: select Stop Application.
Part I1 Install Deep Freeze
Open “DFStd” on Desktop.
Click Next.
Click “I accept…agreement” to go on.
Open “DFStd_KEY” on Desktop, to copy the license key for entering. Click Next.
Click Next, with the only selection of C: (cancel ticks on D: & E:)
Click Install.
Then restart your computer after installation Deep Freeze.
Done!
Top reasons to get JLR Mangoose device:
Uobd2 offers 3 kinds of JLR Mangoose diagnostic tool for you to choose
  1. JLR Mangoose for Jaguar and Land Rover
    -fully supported by dealer level diagnostics & module programming.
    -This includes 2005 & Up Jaguar and 2005 & up Land Rover.
    -Mangoose JLR interface cable with OEM level diagnostic & module programming for Jaguar & Land Rover.
  1. V142 JLR Mangoose Pro Multi-Language for Jaguar and Land Rover
-it is updated version of JLR MANGOOSE.
-Support L316, L319, L320, L322, L359, L538 Land Rover Vehicle Lines
-Support X100, X150, X202, X250, X350, X351, X400 Jaguar Vehicle Lines
  1. JLR Mangoose 3 IN 1
-support Jaguar and Land Rover Support till 2014 year vehicle,
-support Toyota vehicle till 2014
-support Volvo vehicle till 2013 year.
-JLR Mangoose 3 IN 1 is a tool used together with VIDA all-in-one to communicate with vehicles.
-Communication makes diagnosis and troubleshooting possible, as well as downloading software.

Tuesday, August 9, 2016

(Solved) BMW K+DCAN INPA Interface INITIALIZATION ERROR

My k+dcan interface shows error: INITIALIZATION ERROR. killed several hours with this knock-off and i’m about to destroy my laptop because of frustration.
Car: BMW 2011 – e92 – LCI.
i have set the COM to 1, obd.ini is alos COM1. i don’t get it.
K+DCAN USB interface
SOLVED:
(solution offered by an experienced user with K+Dcan cable)
i had to modify the EDIBAS.INI
as follows
RemoteHost
; Description : server address/name
; Default = –
; RemoteHost = Desmo16
Desmo16 being my computer’s name (note that this must be maximum 8 chars)
and
Port
; Description : IP communication port
; Value : 1000 < port < 30000
;
; Spezialfall OP(P)S /ICOM:
; Value : 6801 ;OBD-Treiber (CAN)
; Value : 6802 ;Most-Treiber
;
; Default = –
; Port = 6801
OBD2 notice that you should be sure port is 6801 as mine was 3000.
i also ran the DCAN utility found here: http://osefactory.com/tools/k+dcan/
and set it on 500 kbit DCAN
it worked like a charm after i made these mods.

Sunday, August 7, 2016

BMW INPA Ediabas software and setup instruction

You can download BMW INPA 5.0.2 (last version, includes NCSExpert and WinKFP) software here: http://down.uobdii.com/bmw-inpa-502.zip (this set is fully tested by me).

Unpack INPA and run Programminstallation/setup.exe

1. Choose language:






2. Select “I accept agreement” and click “Next”:






3. Next step:







4. Next step:




5. Next step:

6. Next step:


7. Next step:


8. Next step:

9. Next step:


10. Next step:


11. Next step:


12. Next step (select STD:OBD even if you have DCAN cable) :


13. Next step (select COM port that your cable plugged in):


14. Next step:


15. Next step (click “skip” 3 times):


16. Next step:


17. Next step (restart your computer):

And now,UOD2.NET engineer NOTICE:BMW INPA instruction complete

Saturday, August 6, 2016

Hight cost-effective car OBD2 Cable diagnostic tool under $100



JLR Mongoose Pro v138 US$ 52.00
V138 JLR Mongoose Pro for Jaguar and Land Rover Support till 2014 year vehicle, it is updated version of JLR MANGOOSE.
Operating System: Win XP, Win 7
Support L316, L319, L320, L322, L359, L538 Land Rover Vehicle Lines
Support X100, X150, X202, X250, X350, X351, X400 Jaguar Vehicle Lines



 

JLR mangoose V138 US$ 42.99
JLR Mangoose V138 support diagnostic & module programming for 2005 & Up Jaguar and 2005 & up Land Rover, its computer System Requires: Win XP only








MINI VCI   US$26.99
Maybe the following post from a user can be helpful if you are planning to have one MINI VCI.
I already own a really expensive Mongoose Data cable. My Father-In-Law liked it but didn’t want to pay the huge cost. He only wanted to read error codes, not reprogram anything.
I bought one of those cables for my father-in-law so he could read ODBII codes. It claimed TIS support, but for $35 I was sure this would be read only.
It arrived earlier this week. I just opened the box today. It came with TIS software and drivers. I installed it and it *works* exactly the same as my much more expensive mongoose. It has a full version of TIS, no license required. I reprogrammed a couple of options – works great.
single cable for MINI VCI FOR TOYOTA TIS Techstream V7.10.030
This is $35 folks! Less than the cost of what some of you are paying to enter your TPMS codes for winter/summer tires at the dealership. Shipping took a couple of weeks.
This post from:
http://www.tundratalk.net/forums/tundra-general-discussion/109367-techstream-software-cable-35-a.html



 
Opcom 2012V Opel diagnostic tool US$18.99
OPCOM 2012 diagnostic tool for Opel cars covers almost all Opel cars, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B.
opcom 2012 can read out and clear fault codes, shows you live data, lets you to perform output test. It supports many control units like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic Climate Control, Body Control Unit

Wednesday, August 3, 2016

Toyota tis techstream 9.30.002 software download

UOBD2 engineer tested successfully Toyota TIS Techstream 9.30.002 software.
Toyota Techstream 9.30.002 System requirements: PC with Windows, the software interface supports Techstream (
MINI VCI 16 pin cable, cheapest MINI VCI cableMangoose VCI, MINI VCI 16 Pin and 22 pin cable, Xhorse MVCI, Openport 2.0, AVDI, CarDAQ etc.)
Toyota Techstream 9.30.002 Language: English, French, German, Italian, Japanese, Spanish
Techstream OS requirement:
XP or “XP Mode” in Windows 7 (except win 7 home). A part of users use  VMWare and XP Professional.
How to connect Techstream? 
USB port plugs to laptop, the other end goes to the OBD2 port.
Description: You can put on top of the installed versions or from scratch.
Toyota Techstream 9.30.002 software Free download here.
How to active Techstream 9.30.002?
Go to
C:Program FilesToyota DiagnosticsTechstreamEnvIT3System.ini
Change
TISFunction=1 to TISFunction=0
Save.
All ok
Go==>Toyota tis techstream 10.00.028.software download
More information about pls visit  MINI VCI for Toyota TIS Techstream