How to install Mangoose JLR SDD V145

Mongoose JLR V145 is tested working fine on Jaguar and Land Rover. Here is the Mongoose JLR V145 installation instruction.

SDD V145 compatible hardware:

1.JLR Mangoose interface Cable, $39.99+free shipping

2.JLR Mangoose SDD Pro, $52+free shipping

3. JLR Mangoose SDD Pro support JLR till2014, $40.99+free shipping

4. Mangoose 3 IN 1 support JLR Toyota Volvo, $47.99+free shipping

5.VXDIAG VCX NANO for Jaguar and Land Rover 2 in 1, $99+free shipping

System Requirement:

WIN7 32 Bit

Processor over I3 and I5

Internal memory over 1G

Hard Disk:over 200G

Installation instruction:

You should make sure the network connection is active before installing the software.

Open the CD and copy these files to the desktop

Step1: setup SDD_145.00_FULL

Then open [SDD_145.00_FULL]

Choose language and click [NEXT]

Preparing setup, waiting…

Click NEXT

Choose [I accept…] and click next

Choose [I have read and understand…] and click next

Click OK

Click install and wait until installation complete

It will pop out the message, click no

Install driver, click NEXT

Then click Finish to exit driver setup wizard

And it may take you about 50minutes to 3 hours for the installation.

Then click finish to complete setup

Step2: setup VDF_JA_145

Open the CD and open VDF_JA_145

Choose language and click [NEXT]

Waiting…

Then click Finish to exit the wizard

Step3: setup SPA_145

Open [SPA_145]

Installation complete, click Finish to exit the wizard

Step4: setup VDF_LA_145

Open [VDF_LA_145]

Choose language and click [NEXT]

Waiting…

Then click Finish to exit the wizard

Step5: setup VDF_JV_145

Open [VDF_JV_145]

Choose language and click [NEXT]

Waiting…

Then click Finish to exit the wizard

Step6: setup VDF_LV_145

Open [VDF_JV_145]

Choose language and click [NEXT]

Waiting…

Then click Finish to exit the wizard

Step7:

Then disable both wireless net connection and local area connection

Open [JLR Driver] file and open [MangoosePro_JLR] to begin install.

Step8:

Extract [JLR AutoInstall Patch 145] to the desktop

Open the file -> [Autoinstall]-> [AutoJLR]

Click patch and it will build a new file on the desktop called [user&pass]

Open the [user&pass] file to get username and password

Then open [JLR SDD] on the desktop

And input userID and password you have gotten from the [user&pass] file and click identify

User authentication successful, click continue

Dealer information

Connect vehicle with laptop via USB cable

Input VIN and click identify vehicle

Done!

Article from OBD2 Blog

Hight cost-effective car OBD2 Cable diagnostic tool under $100

JLR Mongoose Pro v138 US$ 52.00
V138 JLR Mongoose Pro for Jaguar and Land Rover Support till 2014 year vehicle, it is updated version of JLR MANGOOSE.
Operating System: Win XP, Win 7
Support L316, L319, L320, L322, L359, L538 Land Rover Vehicle Lines
Support X100, X150, X202, X250, X350, X351, X400 Jaguar Vehicle Lines



 

JLR mangoose V138 US$ 42.99
JLR Mangoose V138 support diagnostic & module programming for 2005 & Up Jaguar and 2005 & up Land Rover, its computer System Requires: Win XP only

MINI VCI   US$26.99
Maybe the following post from a user can be helpful if you are planning to have one MINI VCI.
I already own a really expensive Mongoose Data cable. My Father-In-Law liked it but didn’t want to pay the huge cost. He only wanted to read error codes, not reprogram anything.
I bought one of those cables for my father-in-law so he could read ODBII codes. It claimed TIS support, but for $35 I was sure this would be read only.
It arrived earlier this week. I just opened the box today. It came with TIS software and drivers. I installed it and it *works* exactly the same as my much more expensive mongoose. It has a full version of TIS, no license required. I reprogrammed a couple of options – works great.
single cable for MINI VCI FOR TOYOTA TIS Techstream V7.10.030
This is $35 folks! Less than the cost of what some of you are paying to enter your TPMS codes for winter/summer tires at the dealership. Shipping took a couple of weeks.
This post from:
http://www.tundratalk.net/forums/tundra-general-discussion/109367-techstream-software-cable-35-a.html

 
Opcom 2012V Opel diagnostic tool US$18.99
OPCOM 2012 diagnostic tool for Opel cars covers almost all Opel cars, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B.
opcom 2012 can read out and clear fault codes, shows you live data, lets you to perform output test. It supports many control units like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic Climate Control, Body Control Unit

Customer Experience with JLR Mangoose OBD2 Cable for Jaguar and Land Rover

An increasing number of people buy and use JLR Mangoose for Jaguar and Land Rover
from uobdii.com, why it is so hot? The answer is that many users speak very highly
of JLR Mangoose.In the following parts,I list a real uobd2 customer's experience.
Customer shares his experience in jaguarforums.com:
“I don’t have any experience with that kit, but several of us are successfully using the one at the link below:
Promotion JLR Mangoose for Jaguar and Land Rover V138 Support till 2014 Year
The one I bought came with SDD V134. I had previously understood that V131.03
was the latest version that could be used without an active subscription to TOPix,
 so I purchased that version of the software separately. But after additional
research, I installed the V134 software and it’s working just fine with WiFi
turned off (otherwise it wants to try to log on and update itself). The seller
stated that V134 only worked with 2005 vehicles and later, but its working fine
with our 2004 XJR. I don’t know about the V138 that the uobd2 is now offering.
You should ask them to be sure it will work with your ’07.

Note that for V131.03 and V134, and I believe for V138 also, you must run the
program in Windows XP 32-bit. I first installed it on an old XP laptop, then
after more research I successfully created a Windows XP virtual machine on a
Windows 7 laptop, and that’s what I’m using now. I haven’t worked on the
ABS or airbag systems, but I believe SDD has that capability. I have used SDD
to recalibrate our air suspension ride height, pull P, B, C and U codes, turn
off the automatic setting of the Electronic Park Brake, turn off some of the
annoying alarms, etc. It’s the dealer-level tool, so if the dealer can do it
you probably can too.”

JLR is really only $49.99 free shipping????
“So am I understanding correctly that for 49.99 you got the Mongoose cable AND the
IDS/SDD software? I was under the impression that it cost loads of money but
maybe I’m confused.”—— Confusion from another customer’s.

This is a clone version and yes, that is the correct price. Obviously, you will
receive no warranty support from Jaguar on either the cable or software, but
several members are using that setup successfully. —–uobd2 claim: actually, 
uobd2 items sold to customers have fine warranty support, read complete 
details at:
http://www.uobdii.com/info/uobd2-after-sale-service-363.html